Menu
Brief introduction:
Rust Control 2010 is an anti-rust additive that can be used in petroleum solvents and/or mineral oils, and is free of barium and other heavy metal elements. The anti-rust oil formulated with this additive has a thin and waxy film form, which provides an excellent anti-rust protective film for ferrous metals exposed to corrosive environments. In addition to providing a high level of salt spray protection, the anti-rust oil using Rust Control 2010 provides water displacement, water separation and anti-macular properties. Rust Control 2010 dissolves in most mineral oils and solvents, has no precipitation and good stability.
Similar Product: Alox 2010
Package:190kg/barrel, 1000kg/IBC Tank
Physical characteristics
(1) Appearance(25℃): Brown waxy solid
(2) Specific gravity（15.6℃) ：0.89
(3) Saponification value: 35
(4) Acid value (mg KOH\g):13
(5) Viscosity (cSt) 100 °C: 15
(6) Flash Point ( °C): 170
(7) Base number(mg KOH/g)：31
Film rust inhibitor for excellent salt spray protection
Wet tank protection, water replacement performance, water separation performance—- can quickly and completely separate the moisture remaining in the anti-rust oil. Anti-contamination —- can be safely used in steel coils or stacked metal rust protection applications. Does not contain barium or other heavy metals.
Rust Control 2010 is recommended to be added in formulations from 8.0%-25.0%; Rust Control 2010 Suggested Recipe:
Item | Oil type | solvent type | Dehydration type |
Rust Control 2010 | 8-25% | 8-25% | 8-25% |
Rust Control 2409 | – | – | 0.5-2% |
D40\60\80 | – | Allowance | Allowance |
NO.10 base oil | Allowance | 0-15% | 0-15% |
Total | 100% | 100% | 100% |
Note | Rust Control 2010 may have slight differences in rust protection properties in different viscosities and types of base oils, so it is recommended to confirm before use. | ||
Rust Control 2010 Salt Spray Data (Test Method: ASTM-B117)
Item | Anti-rust time (hours) | |
Dosage（%） | 1. Oil type | 2.solvent type |
10.0 | 27 | 24 |
15.0 | 33 | 32 |
20.0 | 46 | 40 |
25.0 | 57 | 50 |
Note | 1. Oil type use NO.10 Base oil. 2. Solvent type added 15% NO.10 Base oil ，Solvent is D60 . | |
Storage Notes: Sealed stored in cold, dry, good ventilated place, avoid high temperature and moist.
Advantages and dosage: Biocides CMIT/MIT for metalworking fluid
Effectively kills bacteria, molds, and yeasts. The general addition amount is 100-200 ppm.
Isothiazolinone-based biocides: In aqueous metalworking fluids, the general dosage is 0.1% – 0.3% (mass fraction).
What should be considered when you choose the right products for metalworking fluid?
Compatibility with metalworking fluids: Ensure that the product does not have adverse reactions with other components in the processing fluid, resulting in a decline in the performance of the processing fluid.
Spectrum and efficacy of sterilization: According to actual needs, select a product that has a good inhibitory and killing effect on common microorganisms.
Applicable pH range: It should match the pH range of the metalworking fluid.
Safety: Including the health impact on operators and the friendliness to the environment.
Stability: Be able to maintain the stability of the active ingredients during storage and use.
Regulatory compliance: Select products that comply with relevant laws and regulations.
Contact us right now to get more information, professional advice will be supplied within 12 hours.
You can get a price of this model or send us any question to get any information you would like to know, we will reply to you soonest.