Menu
Brief introduction:
Rust Control 2028 is a carefully selected blend of inhibitors that includes the barium salt of an oxygenated hydrocarbon.The residual film of Rust Control 2028 left on the metal after evaporation of the solvent is thin, non-staining and highly protective.
Rust Control 2028 chemical and physical properties make it an important component in the formulation of water displacing rust preventives, oil and solvent soluble corrosion preventives.
Similar product: ALOX 2028
Package: 190kg/barrel, 1000kg/IBC Tank
Typical properties | Appearance(Room temperature) Brown waxy solid Specific gravity (20℃ , g/cm³) 0.97 Total acid number(mg KOH/g） 6.7 Solubility Soluble in mineral oils and synthetic base oils. However, it is necessary to verify the solubility in the base oils used and the compatibility with other additives The above are the main characteristics of the product and should not be regarded as product quality parameters. |
Benefits:
Typical treat：Nominal dosages would range from 8.0 to 25.0 wt. % of the finished lubricant.
Applications：
Suggested Formulation:
Item | Oil corrosion preventives | Solvent corrosion preventives | water displacing |
Rust Control 2028 | 8.0-25.0% | 8.0-25.0% | 8.0-25.0% |
RP7409 | – | – | 0.5-2.0% |
Solvent D60 | – | margin | margin |
T22 | margin | 0-15.0% | 0-15.0% |
Total proportion | 100.0% | 100.0% | 100.0% |
Remarks | Rust Control 2028 may have slight differences in anti-rust properties in different viscosities and types of base oils, so it is recommended to confirm before use. | ||
Anti-rust properties Rust Control 2028 Salt Spray Data (Test Method: ASTM-B117)
Item | Anti-rust time（hour） | |
The amount added（%） | 1.Oil corrosion preventives | 2.Solvent corrosion preventives |
10.0 | 28 | 24 |
15.0 | 36 | 34 |
20.0 | 48 | 48 |
25.0 | 60 | 56 |
Remarks: | 1. The base oil used in the oil corrosion preventives is 70N base oil; 2. Solvent corrosion preventives with 15% 70N base oil, using solvent D60. | |
The salt spray test compared with competitors, pls kindly contact us to get more details.
Storage Notes: Sealed stored in cold, dry, good ventilated place, avoid high temperature and moist.
What should be considered when you choose the right product for metalworking fluid?
Compatibility with metalworking fluids: Ensure that the biocides does not have adverse reactions with other components in the processing fluid, resulting in a decline in the performance of the processing fluid.
Spectrum and efficacy of sterilization: According to actual needs, select a product that has a good inhibitory and killing effect on common microorganisms.
Applicable pH range: It should match the pH range of the metalworking fluid.
Safety: Including the health impact on operators and the friendliness to the environment.
Stability: Be able to maintain the stability of the active ingredients during storage and use.
Regulatory compliance: Select products that comply with relevant laws and regulations.
Contact us right now to get more information, professional advice will be supplied within 12 hours.
You can get a price of this model or send us any question to get any information you would like to know, we will reply to you soonest.